crossi.blogg.se - Honeywell alarm keypad m7240 manual

#HONEYWELL ALARM KEYPAD M7240 MANUAL FULL#
#HONEYWELL ALARM KEYPAD M7240 MANUAL CODE#
#HONEYWELL ALARM KEYPAD M7240 MANUAL PLUS#

To arm your system, enter your security code followed by the desired arming key.The system must be armed before the burglary detection can sense intrusions.

#HONEYWELL ALARM KEYPAD M7240 MANUAL FULL#

See the full User Guide for details on Exit Error alarms.

See your installer for your delay times.

If you cannot leave within this delay time period, you should stop, disarm the system, and start over to avoid a false alarm. If programmed, a slow beeping will sound during the exit delay period until the last 10 seconds, which then changes to fast beeping (alerting you to the end of exit delay).

Exit delay gives you time after arming the system to leave through the designated exit door(s) without setting off an alarm.

You must disarm the system before the entry delay period ends, or an alarm will occur (keypad beeps during the entry delay period, reminding you to disarm the system).

Entry Delays give you time to disarm the system when you enter through the designated entrance door.

A Scheduling feature can be programmed to automatically perform certain functions (e.g., arm the system) at a predetermined time each day.

Ask your installer if these keys are active.

Function keys may have been programmed to perform various functions.

#HONEYWELL ALARM KEYPAD M7240 MANUAL PLUS#

Partitions (VISTA-20P Series) provide two independent areas of detection plus an optional common zone area, with each partition containing a group of zones that can be armed and disarmed without affecting other zones or users.Zone numbers (points of detection) are displayed at the keypad when an alarm or trouble condition occurs.The system sensing devices have been assigned to various “zones,” which are specific areas of detection (e.g., front door, kitchen window, etc.).Each user can be assigned a different security code, each with different authority levels.4-digit security codes are used in conjunction with keypad command to perform system functions.Panic keys (if programmed) let you manually initiate a fire and personal alarms using the keypad.Fire and carbon monoxide detection are always active (if installed) and an alarm sounds if a fire or carbon monoxide condition is detected.Chime mode alerts you to the opening of protected doors and windows while the system is disarmed.Bypass feature lets you bypass selected zones while leaving the rest of the system armed.Several modes of burglary detection: Stay, Night-Stay, Away, Instant, Maximum.

The following is a list of some of the most common features and functions of your system: Your system may also be programmed to automatically send alarm and status messages to a Central Monitoring Station. Optional smoke or combustion detectors designed to provide early warning in case of fire.Various sensors for perimeter and interior burglary detection.At least one keypad which provides control of system and displays system status.Three forms of detection: burglary, fire and emergency (see your installer for which forms of detection are installed).For VISTA-20P / VISTA-20PSIA & VISTA-15P / VISTA-15PSIAįull User Guide Available Online: This Quick Guide describes the most frequently used features and functions of your system.Ĭongratulations on your ownership of a Honeywell Security System.